Mitsubishi Zubadan(PUHZ_SHW112YHA+EHSC-YM9x(11kw)
Včeraj se je na omenjeni toplotni črpalki začela pojavljat tale napaka(glej prilogo).
Nekoliko sem pobrskal in našel kaj bi naj ta napaka pomenila.
L9: Low primary circuit flow rate detected by flow switch
See Action for L3. If the flow switch itself does not work, replace it.Caution: The pump valves may be hot, please take care
L3 Circulation water temperature overheat protection
Flow rate may be reduced check for;
• Water leakage
• Strainer blockage
• Water circulation pump function (Error code may display during filling ofprimary circuit, complete filling and reset error code.)
Vir: https://www.manualslib.com/manual/947624...ml?page=60
Je morda kdo že imel to napako? Oz. bi vedel kaj točno je "flow switch"?
Včeraj se je na omenjeni toplotni črpalki začela pojavljat tale napaka(glej prilogo).
Nekoliko sem pobrskal in našel kaj bi naj ta napaka pomenila.
L9: Low primary circuit flow rate detected by flow switch
See Action for L3. If the flow switch itself does not work, replace it.Caution: The pump valves may be hot, please take care
L3 Circulation water temperature overheat protection
Flow rate may be reduced check for;
• Water leakage
• Strainer blockage
• Water circulation pump function (Error code may display during filling ofprimary circuit, complete filling and reset error code.)
Vir: https://www.manualslib.com/manual/947624...ml?page=60
Je morda kdo že imel to napako? Oz. bi vedel kaj točno je "flow switch"?



